Crosby® Alloy Screw Pin Shackles G-209A
Crosby® Alloy Screw Pin Shackles G-209A
Crosby Alloy Screw Pin Shackles meet the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade B, Class 2, except for those provisions required of the contractor. For additional information, see page 452.
-
Capacities 2 thru 21 metric tons. Meets performance requirements of Grade 8 shackles.
-
Forged Alloy Steel – Quenched and Tempered, with alloy pins.
-
Working Load Limit permanently shown on every shackle.
-
Hot Dip Galvanized.
-
Sizes 3/8 inch and below are mechanically galvanized.
-
Crosby Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
-
Approved for use at -40° C (-40° F) to 204° C (400° F).
-
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
