SOCKETS AND BOOM PENDANTS
FEATURES
Abrasion Resistant
Low Stretch
Made in USA
Low Tolerance
Wire Rope Socket Assemblies
I&I Sling is one of the few companies that specialize in swaged and poured wire rope socket assemblies. Also known as socket lines or pendant lines, these products provide a permanent hardware connection to the end of the wire rope. These assemblies can be made with extremely tight length tolerances, +/- ¼”. Available in both open and closed configurations, socket assemblies
EQUALIZER BLOCK
USE AND CARE
SNATCH BLOCKS
Swage Sockets are fabricated in-house by pressing the socket permanently to the end of the wire rope. This process is only recommended for use with
Poured sockets or spelter sockets are made by pouring a resin inside the socket to secure the wire to the socket. These sockets typically allow any type of wire to be used.
| Rope Diameter (in.) | Breaking Strength (Tons) | Capacity (Tons) |
| 1/2 | 13.3 | 2.6 |
| 9/16 | 16.8 | 3.3 |
| 5/8 | 20.6 | 4.1 |
| 3/4 | 29.4 | 5.8 |
| 7/8 | 39.8 | 7.9 |
| 1 | 51.7 | 10.3 |
| 1-1/8 | 65 | 13 |
| 1-1/4 | 79.9 | 15.9 |
| 1-3/8 | 96 | 19 |
