R.I.N.G. Rope

R.I.N.G. Rope

XTC-48: R.I.N.G. Rope 10.5mm & 11.5mm

High performance climbing line with a light weight design featuring an exclusive, ultra-smooth 48-carrier cover. Ideally suited for mechanical climbing systems used in competitive tree climbing.

  • EN 359 certification for ultra-durable heat-resistant lanyards
  • Utilize for utra-static access line for long climbs or situations where cut resistance is of utmost importance
  • Exclusive tri-braid design with red inspection layer, where if the cover is damaged Red – Is – No – Go

XTC-48 R.I.N.G. Rope Specifications and Data


* Knots and abrupt bends significantly reduce the strength of all ropes and lower the maximum working load.
** For situations where a person is NOT on the rope, the working load may be doubled (5:1).



Green working 155 ft. lbs./lb.
Red ultimate 9,775 ft. lbs./lb.

Specific Gravity: 1.23

Dielectric Strength: The maximum allowable leakage for clean, dry Kernmaster is 500 micro- amperes when tested at 100kV per Yale Method 712-1701 Rev 1 "Routine Production Test." Absorbed and entrained moisture or impurities will increase rope’s conductivity dramatically.