Crosby® Bolt Type Shackles G-2130A
![Crosby G 2130A Crosby® Bolt Type Shackles G 2130A](https://iandisling.com/wp-content/uploads/2021/02/G-2130A.png)
Crosby® Bolt Type Shackles G-2130A
Crosby Bolt Type Shackles with thin head bolt – nut with cotter pin. Meets the performance requirements of Federal Specification R-C-271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor. For additional information, see page 452.
- Capacities 2 to 17 metric tons.
- Meets or exceeds all requirements of Grade 8 shackles.
- Working Load Limit permanently shown on every Crosby Shackle.
- Forged Alloy Steel – Quenched and Tempered, with bow and bolt.
- Hot Dip galvanized.
- Shackles can be RFID EQUIPPED.
- Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, G-2130A meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
- Type Approval and certification in accordance with DNV 2.7-1 Offshore Containers.
- Shackles are Quenched and Tempered and meet DNV impact requirements of 42 Joules (31 ft• Ibf) at -40° C (-40° F).
![Logos 8 Logos 8](https://iandisling.com/wp-content/uploads/2023/07/Logos-8.png)
![G 2130A diagram Crosby Bolt Type Shackles G 2130A diagram](https://iandisling.com/wp-content/uploads/2023/07/G-2130A-diagram.png)
![G 2130A chart Crosby Bolt Type Shackles G 2130A chart](https://iandisling.com/wp-content/uploads/2023/07/G-2130A-chart.png)
![Quality system certification Quality system certification](https://iandisling.com/wp-content/uploads/2023/07/Quality-system-certification.png)
![The coldest journey The coldest journey](https://iandisling.com/wp-content/uploads/2023/07/The-coldest-journey.png)